Presto 23-Quart Pressure Canner and Cooker (01781) Review
The most popular home pressure canner: big enough to double-stack pints, light enough to lift full, under $200.
The Presto 23-Quart is the pressure canner we'd recommend to most people: it holds seven quarts or 20 pints, works on gas, coil and smooth-top ranges, and costs under $200, as long as you get its dial gauge tested each year.
- Price
- About $190
- Holds
- 7 quarts or 20 pints
- Control
- Dial gauge
- Heat
- Gas, coil, smooth-top
Good
- Seven quarts or 20 pints per load (pints double-stacked)
- Doubles as a boiling-water canner
- Light aluminum, easy to lift when full
- Parts like the sealing ring and overpressure plug are cheap and widely sold
Not so good
- Dial gauge needs testing every year
- Rubber sealing ring wears out and must be replaced
- Not for induction cooktops
Who it's for
Buy it if you want one canner that handles green beans, chicken and stock under pressure and doubles as a water-bath pot for jam and pickles.
Skip it if you cook on induction (get the induction version) or you never want to think about gauge testing (look at the All American 921).
How it works
The 01781 is a thin-walled aluminum pot with a locking lid, a rubber sealing ring, a dial gauge, a vent pipe and an air vent/cover lock that pops up when there's pressure inside. You vent steam for 10 minutes, put the weight on the vent pipe, and adjust your burner to hold the pressure on the dial. With a dial gauge you can hit USDA's exact pressure for your altitude, 11 pounds at sea level, 12 at 3,000 feet and so on, instead of jumping to 15 like a weighted-gauge canner.
That precision has a cost: you have to watch the dial and nudge the burner, and the gauge has to be accurate. USDA and university extension services say to test dial gauges every year and replace one that reads more than 2 pounds off. Many county extension offices test Presto gauges for free or a small fee, and Presto offers testing too.
Capacity
Seven quart jars fit in one layer. Pints and half-pints go in two layers with a second rack, so you can do 20 pints of green beans in one load. That's the main reason to buy the 23-quart over the 16-quart: same seven quarts, but double the pints, and it's tall enough to use as a water-bath canner for quarts.
The 01781 is aluminum, so it won't heat on induction. If your range is induction, the otherwise identical Presto 01784 has a stainless-clad base.
What it's like to own
The parts that wear are the rubber sealing ring and the small overpressure plug. Both are inexpensive and stocked at hardware stores and on Amazon; replace them when the ring gets hard, cracked or stretched, or steam leaks around the lid. Store the canner with the lid upside down on the pot, not locked on, so the ring doesn't take a set.
If you'd rather not depend on the dial, Presto sells a 3-piece pressure regulator for its canners that rocks at 5, 10 or 15 pounds, which turns the 01781 into a weighted-gauge canner. Keep the dial as a reference, but at that point you go by the weight.
How it compares
| Presto 23-Quart | All American 921 | Presto Precise 23-Quart | |
|---|---|---|---|
| Price | About $190 | About $450 | About $370 |
| Holds | 7 qt or 20 pt | 7 qt or 18 pt | 7 qt or 20 pt |
| Control | Dial gauge | Weight (plus dial) | Temperature sensor |
| Gasket | Yes, replaceable | No | Yes |
| Induction | No | No | Plugs in |
The Presto vs All American comparison goes deeper. Short version: the All American lasts longer and needs no gasket, but it's twice the price, heavier, and slower to heat and cool.
Questions
Can the Presto 23-quart water-bath can quarts?
Yes. It's tall enough to cover quart jars with water when used without the lid locked, which is one reason to choose it over the 16-quart.
Where do I get the gauge tested?
Call your county extension office first; many test Presto gauges. Presto also tests gauges. Do it every year before canning season, and after the canner is dropped.
How long does the sealing ring last?
It depends on use. Replace it when it's hard, cracked or stretched, or steam escapes around the lid. Replace the overpressure plug at the same time.