How to Can Dill Pickles
Pickles are safe in a water bath because the vinegar makes them acidic. The brine ratio isn't something to adjust.
For USDA quick fresh-pack dill pickles, use 5% vinegar in the tested brine, leave 1/2 inch of headspace, and process pints for 10 minutes or quarts for 15 minutes at 0 to 1,000 feet, or use low-temperature pasteurization at 180 to 185°F for 30 minutes for crisper pickles.
USDA quick fresh-pack dill pickles
For about 8 pounds of 3- to 5-inch pickling cucumbers (7 to 9 pints), USDA's tested brine is 1 1/2 quarts of 5% vinegar, 2 quarts of water, 1/2 cup of canning or pickling salt and 1/4 cup of sugar, with 2 tablespoons of whole mixed pickling spice tied in cloth. Each pint gets 1 teaspoon of mustard seed and 1 1/2 heads of fresh dill (or 1 1/2 teaspoons of dill seed). The cucumbers soak 12 hours in a salt brine first; see USDA Guide 6 for the full method.
Process
| Jar | 0–1,000 ft | 1,001–6,000 ft | Above 6,000 ft |
|---|---|---|---|
| Pints | 10 min | 15 min | 20 min |
| Quarts | 15 min | 20 min | 25 min |
Crisper pickles: low-temperature pasteurization
For recipes that allow it, including this one, you can process jars in water held at 180 to 185°F for 30 minutes instead of boiling. Start with the canner half full of 120 to 140°F water, add jars, add hot water to 1 inch above the jars, and use a thermometer to keep it in range the whole 30 minutes. Above 185°F, pickles soften.
Tips
- Use fresh, firm pickling cucumbers and trim 1/16 inch off the blossom end, which holds enzymes that soften pickles.
- Use vinegar labeled 5% acidity, and don't dilute the brine beyond the recipe.
- Canning or pickling salt keeps brine clear; flake salt measures inconsistently.
Questions
Why are my pickles soft?
Overmature cucumbers, not trimming the blossom end, too-weak brine, or overprocessing. Try the low-temperature method.
Can I use less vinegar?
No. The vinegar is what makes pickles safe to water-bath can.